PulsePoint Nozzles

PulsePoint Nozzles

The AN-2 PulsePoint Air Nozzle fits at the end of a gas line to provide focused continual ionization. It eliminates potentially harmful static charges in seconds. Its small footprint enables the nozzle to be mounted on equipment in physically restrictive areas. The AN-6 In-Line Ionizing Air Nozzle fites where needed on the end or in the middle of the air supply line. It allows ionized gas to be directed through tubing to areas not normally accessible. Nozzles are powered by the AirFlow Controller.

Specification:

Discharge Time	<2 sec. at 6
Size (W x H x D)	3.4" x 1.0" (86 mm x 25 mm)
Weight	6 oz.(170 grams)
Material	Delrin
Air/Gas Supply	Inlet pressure: 5 PSI min., 100 PSI max
Air Flow	1.0 SCFM at 10 PSI 6.5SCFM at 50 PSI 13.5 SCFM at 100 PSI
Inlet/Outlet Fitting	1/4" NPT

PulsePoint Nozzles Products and Accessories

Description	Part Number
HV2 2-to-1 connector (splitter)	5050538
HV4 4-to-1 connector (splitter)	5050539
AN2 Pulse-Point Ionizing Air Nozzle, 115V, 60 Hz, includes AFC-2 controller	5050874
AN2 Pulse-Point Ionizing Air Nozzle, 230V, 50 Hz CE, includes AFC-2 controller	5050880
AN6 In-Line Ionizing Air Nozzle, 115V, 60 Hz, includes AFC-2 controller	5050875
AN6 Pulse-Point Ionizing Air Nozzle, 230V, 50 Hz CE, includes AFC-2 controller	5050881
AN2 Pulse-Point Ionizing Air Nozzle, requires AFC-2 controller	4005182
AN6 In-Line Ionizing Air Nozzle, requires AFC-2 controller	4005183
Spare Parts
Replacement Electrode, tungsten	4370531
PGF1 0.22 micron in-line pre-filter	4105775
YQC 2-to-1 Air Quick Connector	5050540

Back