PulseGun 8

PulseGun 8

The PG-8 blow-off gun rapidly neutralizes static charges in seconds and keeps particles from contaminating product surfaces. This cleanroom ionizing gun with replaceable Class I electrodes is specifically designed for ultra-clean envrionments. An internal 0.2 micron filter eliminates the problem of particles in the gas supply line and makes the PG-8 suitable for use in a Class I cleanroom.

Specification:

Discharge Time	<2 sec. at 6
Size (W x H x D)	1.25" Dia. x 5.75" L (32 mm Dia. x 146 mm L)
Weight	14 oz. (397 g)
Cable Connector	7 ft. (2.1 m)
Gas Tube	1/4" OD, 2/16" ID Polyurethane
Air/Gas Supply	Inlet pressure 5 PSI min; 100 PSI max
Air Flow	PG-8 0.8 SCFM at 10 PSI 5.5 SCFM at 50 PSI 11.5 SCFM at 100 PSI

PulseGun 8 Products and Accessories

Description	Part Number
PG-8 Pulse Gun 8 Cleanroom Ionizing Gun, 115V, 60 HZ, includes AFC-2 controller	5050871
PG-8 Pulse Gun 8 Cleanroom Ionizing Gun 230V, 50 Hz CE, includes AFC-2 Controller	5050877
PG-8 Pulse Gun 8, requires AFC-2 controller	4005150
Spare Parts
Replacement Electrode, tungsten	4370531
PGF1 0.22 micron in-line pre-filter	4105775
Hook	4510208
PGF 8 0.22 micron internal filter (2)	5050541
Dowel Pin	4670327
Washer Rubber	4671210
O-Ring, Seal	4671211
Spring	4671215
Fitting Male Conn	4671326
Valve/Electrode Kit for PG5	5050991
Valve/Electrode Kit for PG8	5050992
Boss Top Pulse Gun	4370525
Valve Shaft	4370526
Electrode, Tungsten (2 required)	4370531
Handle, Trigger PG5 (black)	4401805
Handle, Trigger PG8 (White)	4401806
Boss PG5 Black	4401807
Boss PG8 White	4401808
Screw #2 X 1/4 PHSS	4640797
Screw #4 X 1/4 PHMS	4640799
Bracket Ground Pulse Gun	4510207

Back